Home • Departments • Microphones • Sennheiser Wired Microphones • Sennheiser MZF 8000

Sennheiser MZF 8000

Product Description


MZF 8000 Filtermodul


Overview MZF 8000 is a new filter module for the MKH 8000 professional RF condenser microphone series. Especially in the broadcast and film industries, it effectively blocks interference caused by infrasound, such as low-frequency noises caused by wind and handling. Features Switchable roll-off filter (-3 dB at 160 Hz) Fixed low-cut filter (-3 dB at 16 Hz) Suppresses infrasound especially well Extremely low inherent noise - complex acoustic details are preserved High-quality -10 dB pad protects against overdriving Fully floating balanced output allows for non-critical connection technology with minimal distortion Extremely compact design Module can be used with remote accessory

Technical Data Dimensions Ų 19 x 29 mm Weight 26 g Attenuation -10 dB (switchable) Nominal impedance 50 Ohm Phantom powering 44 to 52 V Equivalent noise level increase at 0 dB: 1 dB(A), at -10 dB: 4 dB (A) Input voltage range at 0 dB: max. 14 dBV, at -10 dB: max. 9 dBV Output voltage at 0 dB: max. 14 dBV, at -10dB: max. - 1 dBV Low-cut filter -3 dB bei 160 Hz (switchable)

Overview

MZF 8000 is a new filter module for the MKH 8000 professional RF condenser microphone series. Especially in the broadcast and film industries, it effectively blocks interference caused by infrasound, such as low-frequency noises caused by wind and handling.

Features

Switchable roll-off filter (-3 dB at 160 Hz)
Fixed low-cut filter (-3 dB at 16 Hz)
Suppresses infrasound especially well
Extremely low inherent noise - complex acoustic details are preserved
High-quality -10 dB pad protects against overdriving
Fully floating balanced output allows for non-critical connection technology with minimal distortion
Extremely compact design
Module can be used with remote accessory

Technical Data

Dimensions

Ų 19 x 29 mm
Weight

26 g
Attenuation

-10 dB (switchable)
- Nominal impedance
  
  50 Ohm
- Phantom powering
  
  44 to 52 V
- Equivalent noise level
  
  increase at 0 dB: 1 dB(A), at -10 dB: 4 dB (A)
- Input voltage range
  
  at 0 dB: max. 14 dBV, at -10 dB: max. 9 dBV
- Output voltage
  
  at 0 dB: max. 14 dBV, at -10dB: max. - 1 dBV
- Low-cut filter
  
  -3 dB bei 160 Hz (switchable)