Home • Departments • Speakers - Monitors • QSC • QSC E Series • QSC E215

QSC E215

Product Description


E215 Dual 15-inch 2-Way Passive Loudspeaker The E215 is a trapezoidal, two-way loudspeaker featuring dual 15-inch 500 W (continuous) die-cast aluminum frame woofers with 3.5-inch voice coil. It employs a Frequency-shading topology across both woofers to maximize low frequency output, while minimizing interference through the HF crossover transition. It is intended for use when high-power and extended low-end are needed from a single full-range loudspeaker. A large format 2.8-inch compression driver attached to the 75° DMT™ waveguide assures that even distant listeners will be well covered. The E Series is a range of passive loudspeakers offering robust construction, trusted reliability and overall sonic performance beyond expectations. Intended for sound reinforcement in entertainment applications including live performance, DJ and dance music, karaoke and event production, E Series loudspeakers will deliver outstanding results. Building on QSC’s proven “Systems” methodology, the E Series loudspeakers’ performance is further enhanced when paired with QSC’s GXD or PLD amplifiers or with a QSC TouchMix digital mixer, and taking advantage of the on-board DSP and factory-tuned presets. These presets support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

E215

Dual 15-inch 2-Way Passive Loudspeaker

The E215 is a trapezoidal, two-way loudspeaker featuring dual 15-inch 500 W (continuous) die-cast aluminum frame woofers with 3.5-inch voice coil. It employs a Frequency-shading topology across both woofers to maximize low frequency output, while minimizing interference through the HF crossover transition. It is intended for use when high-power and extended low-end are needed from a single full-range loudspeaker. A large format 2.8-inch compression driver attached to the 75° DMT™ waveguide assures that even distant listeners will be well covered.

The E Series is a range of passive loudspeakers offering robust construction, trusted reliability and overall sonic performance beyond expectations. Intended for sound reinforcement in entertainment applications including live performance, DJ and dance music, karaoke and event production, E Series loudspeakers will deliver outstanding results. Building on QSC’s proven “Systems” methodology, the E Series loudspeakers’ performance is further enhanced when paired with QSC’s GXD or PLD amplifiers or with a QSC TouchMix digital mixer, and taking advantage of the on-board DSP and factory-tuned presets. These presets support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

Features

High output, professional quality sound with 1000 W continuous power
E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers.
Titanium diaphragm for high fidelity and long life
Rugged tour-grade textured paint
Foam-lined perforated steel grill
Optional Padded Cover for protection during transportation
Optional M10 rigging kit available for permanent installation

SPECIFICATIONS	E215
Configuration	2 × 15-inch, 2-way non-powered
Frequency Range1 (-6 dB)	49 Hz - 20 kHz
Frequency Range1 (-10 dB)	39 Hz - 20 kHz
Power capacity²: continuous/peak	1000 W / 4000 W
Sensitivity	98 dB, 1 W @ 1 m
Coverage Angle	75° conical DMT
Output1 (peak SPL @ 1 m)	134 dB
Drivers LF HF	2 × 381 mm (15 in) driver with 89 mm (3.5 in) voice coil 38 mm (1.5 in) exit, 71 mm (2.8 in) voice coil, compression driver
Nominal Impedance	4?
Cross-over	Full-range only, 1.8 kHz
Input connectors	2 × NL4, 1 × barrier strip
Enclosure	Trapezoidal, plywood, black texture paint finish. Two side mounted handles. Perforated, powder-coated steel grille with foam lining.
Mounting and suspension	9 × M10 suspension points
Speaker Dimensions (W×H×D)	420 × 1125 × 464 mm 16.5 × 44.3 × 18.3 in
Carton Dimensions (W×H×D)	520 × 560 × 1226 mm 20.5 × 22 × 48.3 in
Net speaker weight	49.1 kg / 108 lb
Shipping Weight	56.3 kg / 124.1 lb

1 With QSC Processing
2 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct.

*All specifications are subject to change without notice.