PreSonus CDL12
PreSonus CDL12
Zoom

PreSonus CDL12

PreSonus CDL12
Item# CDL12
$2,199.99

Product Description

 

CDL12

Constant Directivity: Consistent, Coherent Sound

The PreSonus® CDL12 is the result of years of research and development, combining the best attributes of point source and line array technology into a unique patent-pending design. Based on the Constant-Directivity Two-Way Loudspeaker System design presented at the 143rd AES Convention in New York by Hugh Sarvis and Don Keele, the CDL12 radiates a highly focused pattern with consistent SPL throughout the frequency response range, both on- and off-axis. The result is clear, articulate speech intelligibility and natural music reproduction.

 

 
Technical Specifications
Acoustic Performance
Configuration Active 2-way
Frequency Response (-3 dB) 48 Hz – 18 kHz
Frequency Response (-10 dB) 42 Hz – 19 kHz
Nominal Coverage (-6 dB) 120° x 20° per enclosure
Maximum Peak SPL 131 dB
Crossover Frequency 420 Hz
Transducer
LF Transducer 12” (2.5” voice coil)
HF Transducer 8 x 2” (1” Voice Coil)
Amplifier
Type Class D
Total Power Output 2,000W Peak, 1,000W Program (500W RMS)
LF Power 1,000W Peak, 500W Program (250W RMS)
HF Power 1,000W Peak, 500W Program (250W RMS)
Cooling Free air convection
Rated THD <0.05% (20 Hz - 20 kHz)
Dynamic Range 119 dB (A-weighted)
Bandwidth 20 Hz - 20 kHz
Mains Connection powerCON™ In and Out
Connections and Controls
Input Channels 1 Line
Input Connector Types 1 XLR
Line Input Impedance 40 k?
Maximum Input +4 dBu
Output Connector Direct Line Out (XLR)
Networking Dante® (Audio and Control), Control (only) via locking Ethernet
Controls Preset Select
HPF On/Off
Indicators Over Temperature, Signal, -3 dB, Limiter, Clip, Network Status
DSP
Effects Compression, Limiting, Delay, 8-band EQ and preset selection via WorxControl
HPF 90 Hz, 4th-order Butterworth
Bit Depth 24-bit
Sample Rate 48 kHz
Enclosure
Material 15 mm eucalyptus plywood
Finish Chemline™ Polyurea
Grille Powder-coated steel
Dimensions (HxWxD) 18.6” x 20.8” x 17.5” (473 mm x 529 mm x 444.5 mm)
Unit Weight 65 lbs. (29.5 kg)
Safety
Amplifier Protection Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection Limiter
Power
AC Power Input 90-260V~, 50-60 Hz
AC Power Consumption (1/8 Power) 4.2 amps
Suspension Mounting
Rigging Points Integrated Rigging (10:1 load)
Mounting Dual-position pole mount (0° and 10°) 35 mm
Optional Accessories
Rigging CDL Rigging Grid, CDL Rigging Extension Bar, CDL Rigging Sling
Other CDL12-Tote Tote Bag
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
 
 

Scroll to top