Home Brands Mackie Mackie Powered Loud speakers Mackie SRM650

Mackie SRM650

Product Description


Mackie's SRM650 is a 1600W system power paired with custom transducers that deliver gig-level volumes with room to spare. It features a 15" high-output LF driver and 1.4" titanium dome compression driver, as well as Mackie's signature "Built-Like-A-Tank" construction. It is an all-wood, internally-braced cabinet that delivers unmatched roadworthiness. A rugged 18-gauge steel grille and fine-textured, sleek black cabinet finish further enhance its safety features. From an audio perspective, it is front ported for maximum low-end extension and punch and has Mackie's High-Definition Audio Processing for professional sound with unmatched clarity. A patented acoustic correction developed with touring geniuses at EAW, and a precision 2-way digital crossover and driver time-alignment and phase correction lend incredible clarity and definition to signal reproduction. Mackie's quick one-button Speaker Mode selection for application-specific voicing (PA, DJ, Monitor and Soloist) make for effortless setup. Effortlessly eliminate nasty feedback with one-button automatic Feedback Destroyer, and use then integrated 2-channel mixer featuring dual Mackie Wide-Z inputs. This box handles anything from mics to guitars to mixers with a single twist of the gain knob. Patching includes stereo RCA inputs for easy connection to music source, making it perfect for the singer/songwriter: sinply plug in and leave the mixer at home. Smart Protect DSP kicks in to protect your investment when things get pushed a little too hard, and monitor-specific 60-degree angle and voicing mode perfect for cutting through on stage.

Mackie's SRM650 is a 1600W system power paired with custom transducers that deliver gig-level volumes with room to spare. It features a 15" high-output LF driver and 1.4" titanium dome compression driver, as well as Mackie's signature "Built-Like-A-Tank" construction. It is an all-wood, internally-braced cabinet that delivers unmatched roadworthiness. A rugged 18-gauge steel grille and fine-textured, sleek black cabinet finish further enhance its safety features.

From an audio perspective, it is front ported for maximum low-end extension and punch and has Mackie's High-Definition Audio Processing for professional sound with unmatched clarity. A patented acoustic correction developed with touring geniuses at EAW, and a precision 2-way digital crossover and driver time-alignment and phase correction lend incredible clarity and definition to signal reproduction. Mackie's quick one-button Speaker Mode selection for application-specific voicing (PA, DJ, Monitor and Soloist) make for effortless setup.

Effortlessly eliminate nasty feedback with one-button automatic Feedback Destroyer, and use then integrated 2-channel mixer featuring dual Mackie Wide-Z inputs. This box handles anything from mics to guitars to mixers with a single twist of the gain knob. Patching includes stereo RCA inputs for easy connection to music source, making it perfect for the singer/songwriter: sinply plug in and leave the mixer at home. Smart Protect DSP kicks in to protect your investment when things get pushed a little too hard, and monitor-specific 60-degree angle and voicing mode perfect for cutting through on stage.


Speaker configuration Active/passive: Active Type: 2-Way full range LF driver: 15" MF driver: Not applicable HF driver: 1" Power amp (active) Amplifier type: D Wattage: 800W RMS Mixer/preamp: Yes Power capacity (passive) 8 Ohms program/peak: N/A 4 Ohms program/peak: N/A Included power amp: No Audio Frequency response: 50Hz - 17kHz Coverage pattern: 90 x 50 Max SPL: 133 dB Enclosure Construction: 15mm poplar Width: 17.5" Height: 26.7" Depth: 14.9" Weight: 55 lbs. Inputs XLR: 2 TRS: 2 TS: Not applicable RCA: 1 SPEAKON: Not applicable Output/thru XLR: 1 TRS: Not applicable RCA: Not applicable SPEAKON: Not applicable

Acoustic Performance: Frequency Response (-3 dB): 50 Hz-17 kHz Frequency Response (-10 dB): 39 Hz-20 kHz Max peak SPL: 133dB Crossover Point: 3kHz Dispersion [H x V]: 90 Ė x 50 Ė High-Frequency Section Voice Coil Diameter: 1" Horn Entry Diameter: 1.4" Diaphragm Material: Titanium Magnet Material: Ferrite Low-Frequency Section Woofer Diameter: 15" Voice Coil Diameter: 3.0" Diaphragm Material: Paper Magnet Material: Ferrite Power Amplifiers System Power Amplification Rated Power: 800W RMS, 1600W peak Low Frequency Power Amplifier Rated Power: 400W RMS, 800W peak Rated THD: < 1% Cooling: Convection Design: Class D High Frequency Power Amplifier Rated Power: 400W RMS, 800W peak Rated THD: < 1% Cooling: Convection Design: Class D

Speaker configuration

Active/passive: Active
Type: 2-Way full range
LF driver: 15"
MF driver: Not applicable
HF driver: 1"

Power amp (active)

Amplifier type: D
Wattage: 800W RMS
Mixer/preamp: Yes

Power capacity (passive)

8 Ohms program/peak: N/A
4 Ohms program/peak: N/A
Included power amp: No

Audio

Frequency response: 50Hz - 17kHz
Coverage pattern: 90 x 50
Max SPL: 133 dB

Enclosure

Construction: 15mm poplar
Width: 17.5"
Height: 26.7"
Depth: 14.9"
Weight: 55 lbs.

Inputs

XLR: 2
TRS: 2
TS: Not applicable
RCA: 1
SPEAKON: Not applicable

Output/thru

XLR: 1
TRS: Not applicable
RCA: Not applicable
SPEAKON: Not applicable

Acoustic Performance:

Frequency Response (-3 dB): 50 Hz-17 kHz
Frequency Response (-10 dB): 39 Hz-20 kHz
Max peak SPL: 133dB
Crossover Point: 3kHz
Dispersion [H x V]: 90 Ė x 50 Ė

High-Frequency Section

Voice Coil Diameter: 1"
Horn Entry Diameter: 1.4"
Diaphragm Material: Titanium
Magnet Material: Ferrite

Low-Frequency Section

Woofer Diameter: 15"
Voice Coil Diameter: 3.0"
Diaphragm Material: Paper
Magnet Material: Ferrite

Power Amplifiers

System Power Amplification
Rated Power: 800W RMS, 1600W peak

Low Frequency Power Amplifier

Rated Power: 400W RMS, 800W peak
Rated THD: < 1%
Cooling: Convection
Design: Class D

High Frequency Power Amplifier

Rated Power: 400W RMS, 800W peak
Rated THD: < 1%
Cooling: Convection
Design: Class D