Home • Departments • Install - Contractor - Architectural • Lowell • Lowell LSGR-4432

Lowell LSGR-4432

Product Description


LSGR-4432: Seismic Gangable Rack 44U x 32?D


44U x 32"D Seismic gangable rack with adjustable rails is fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions, and including corner brackets in base. Professional engineer certified for two categories of seismic qualifications — Life Safety/Essential Systems (Ip=1.5) and Anchorage by code (Ip=1.0).

SPECIFICATIONS Rack Space: 44U Height: 83.125 in. Width: 23.06 in. Depth: 32.00 in. (29.34 usable) FEATURES Configurable top has 10U opening for 19 in. panel. Solid closure panels included. Open sides, X-frame construction, with multiple openings Open front (optional door) Rear door with top/bottom vents and key lock Two-pair fully adjustable rails tapped 10-32 with RU scale Cable Management: Multiple lacing points, holes, knockout panels Pilot Point screws with captive washers Grounding stud Threaded inserts (for optional leg levelers) Beveled corners Black wrinkle powder epoxy finish UL Listed load capacity: 3150 lbs. Seismic-Certified load capacity: 900-1200 lbs. (see Technical Downloads) Includes P.E. Certified documentation COMPLIANCE & CERTIFICATION EIA/TIA compliant UL 2416 Listed RoHS compliant Certified U.S. steel Made in Missouri, U.S.A. P.E. Certified (Seismic Sec. 1613 — 2009 IBC, 2010 CBC; 2010 OSHPD) A&E SPECIFICATIONS The EIA/TIA/RoHS compliant, seismic-certified gangable rack shall be Lowell Model No. LSGR-4432 which shall include P.E. Certified documentation as specified in the 2009 International Building Code Section 1613, 2010 California Building Code Section 1613 and 2010 California’s Office of Statewide Health Planning and Development. Overall measurements shall be 83.125"H x 32"D x 23.06"W with panel space of 44 rack units. The rack shall include a recessed rear door with vents and key lock; top with 10U opening and compound knockouts; open base with grounding stud and holes for anchor bolts (not included); two pairs adjustable mounting rails with printed RU increments; knockout panels with combination knockouts above rear door; blank project panels below rear door; and provisions to mount an optional surface-mount front door (ordered separately). The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black wrinkle powder epoxy finish. It shall be listed to UL 2416.

44U x 32"D Seismic gangable rack with adjustable rails is fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions, and including corner brackets in base. Professional engineer certified for two categories of seismic qualifications — Life Safety/Essential Systems (Ip=1.5) and Anchorage by code (Ip=1.0).

SPECIFICATIONS

Rack Space: 44U
Height: 83.125 in.
Width: 23.06 in.
Depth: 32.00 in. (29.34 usable)

FEATURES

Configurable top has 10U opening for 19 in. panel. Solid closure panels included.
Open sides, X-frame construction, with multiple openings
Open front (optional door)
Rear door with top/bottom vents and key lock
Two-pair fully adjustable rails tapped 10-32 with RU scale
Cable Management: Multiple lacing points, holes, knockout panels
Pilot Point screws with captive washers
Grounding stud
Threaded inserts (for optional leg levelers)
Beveled corners
Black wrinkle powder epoxy finish
UL Listed load capacity: 3150 lbs.
Seismic-Certified load capacity: 900-1200 lbs. (see Technical Downloads)
Includes P.E. Certified documentation

COMPLIANCE & CERTIFICATION

EIA/TIA compliant
UL 2416 Listed
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.
P.E. Certified (Seismic Sec. 1613 — 2009 IBC, 2010 CBC; 2010 OSHPD)

A&E SPECIFICATIONS

The EIA/TIA/RoHS compliant, seismic-certified gangable rack shall be Lowell Model No. LSGR-4432 which shall include P.E. Certified documentation as specified in the 2009 International Building Code Section 1613, 2010 California Building Code Section 1613 and 2010 California’s Office of Statewide Health Planning and Development. Overall measurements shall be 83.125"H x 32"D x 23.06"W with panel space of 44 rack units. The rack shall include a recessed rear door with vents and key lock; top with 10U opening and compound knockouts; open base with grounding stud and holes for anchor bolts (not included); two pairs adjustable mounting rails with printed RU increments; knockout panels with combination knockouts above rear door; blank project panels below rear door; and provisions to mount an optional surface-mount front door (ordered separately). The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black wrinkle powder epoxy finish. It shall be listed to UL 2416.