Home • Departments • Install - Contractor - Architectural • Lowell • Lowell LSER-3527

Lowell LSER-3527

Product Description


LSER-3527: Seismic Rack 35U x 27?D


Seismic-certified stand-alone rack with enclosed sides and adjustable rails is fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions with corner brackets in base. Professional engineer certified for two categories of seismic qualifications — Life Safety/Essential Systems (Ip=1.5) and Anchorage by code (Ip=1.0).

SPECIFICATIONS Rack Space: 35U Height: 67.375 in. Width: 23.06 in. Depth: 27.00 in. (24.34 usable) FEATURES Configurable top with 7U opening for 19 in. panels (solid closure panels included) Open base with corner weldments Welded sides with vents Open front (optional door) Recessed rear door with vents and key lock One-pair fully adjustable rails tapped 10-32 (printed RU scale) Cable Management: Multiple lacing points, knockout panels Pilot Point screws with captive washers Grounding stud Threaded inserts (for optional leg levelers) Beveled corners Black wrinkle powder epoxy finish UL Listed load capacity: 3150 lbs. Seismic-Certified load capacity: 900-1200 lbs. (See Technical Downloads) Includes P.E. Certified documentation COMPLIANCE & CERTIFICATION EIA/TIA compliant UL 2416 Listed RoHS compliant Certified U.S. steel Made in Missouri, U.S.A. P.E. Certified (Seismic Sec. 1613 — 2009 IBC, 2010 CBC, 2010 OSHPD) A&E SPECIFICATIONS The EIA/TIA/RoHS compliant floor rack shall be Lowell Model No. LSER-3527. Overall measurements shall be 67.375"H x 27"D x 23.06"W with panel space of 35 rack units. Load capacity shall be 3150 lbs. The rack shall include a recessed rear door with vents and key lock, welded side panels with vents, top with 7U opening and combination knockouts, open base with grounding stud and corner weldments, one pair adjustable front mounting rails with printed RU increments, combination knockout panels above rear door, blank panels below rear door, and provisions to mount an optional surface-mount front door or rear rails (ordered separately). The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black wrinkle powder epoxy finish. It shall be UL Listed to UL2416 and shall meet or exceed requirements for Category 1 (Anchorage) and Category 2 (Anchorage & Rack) as specified in International Building Code (IBC, 2009, section 1613), California Building Code (CBC, 2010, section 1613), and California Office of Statewide Health Planning and Development (OSHPD,2010). The rack shall include P.E. certified documentation.

Seismic-certified stand-alone rack with enclosed sides and adjustable rails is fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions with corner brackets in base. Professional engineer certified for two categories of seismic qualifications — Life Safety/Essential Systems (Ip=1.5) and Anchorage by code (Ip=1.0).

SPECIFICATIONS

Rack Space: 35U
Height: 67.375 in.
Width: 23.06 in.
Depth: 27.00 in. (24.34 usable)

FEATURES

Configurable top with 7U opening for 19 in. panels (solid closure panels included)
Open base with corner weldments
Welded sides with vents
Open front (optional door)
Recessed rear door with vents and key lock
One-pair fully adjustable rails tapped 10-32 (printed RU scale)
Cable Management: Multiple lacing points, knockout panels
Pilot Point screws with captive washers
Grounding stud
Threaded inserts (for optional leg levelers)
Beveled corners
Black wrinkle powder epoxy finish
UL Listed load capacity: 3150 lbs.
Seismic-Certified load capacity: 900-1200 lbs. (See Technical Downloads)
Includes P.E. Certified documentation

COMPLIANCE & CERTIFICATION

EIA/TIA compliant
UL 2416 Listed
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.
P.E. Certified (Seismic Sec. 1613 — 2009 IBC, 2010 CBC, 2010 OSHPD)

A&E SPECIFICATIONS

The EIA/TIA/RoHS compliant floor rack shall be Lowell Model No. LSER-3527. Overall measurements shall be 67.375"H x 27"D x 23.06"W with panel space of 35 rack units. Load capacity shall be 3150 lbs. The rack shall include a recessed rear door with vents and key lock, welded side panels with vents, top with 7U opening and combination knockouts, open base with grounding stud and corner weldments, one pair adjustable front mounting rails with printed RU increments, combination knockout panels above rear door, blank panels below rear door, and provisions to mount an optional surface-mount front door or rear rails (ordered separately). The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black wrinkle powder epoxy finish. It shall be UL Listed to UL2416 and shall meet or exceed requirements for Category 1 (Anchorage) and Category 2 (Anchorage & Rack) as specified in International Building Code (IBC, 2009, section 1613), California Building Code (CBC, 2010, section 1613), and California Office of Statewide Health Planning and Development (OSHPD,2010). The rack shall include P.E. certified documentation.