Home • Departments • Install - Contractor - Architectural • Lowell • Lowell LPTR4-2419

Lowell LPTR4-2419

Product Description


LPTR4-2419: Pull & Turn Rack 24U x 19?D


24U pull-out rack for superior access to equipment in cabinets or millwork, the top section of the rack slides forward and turns (left or right), locking at several positions. For loads up to 250 lbs.

SPECIFICATIONS Rack Space: 24U Height: 44.58 in. Width: 19.13 in. Depth: 19.22 in. (19 usable) FEATURES Removable base mounts flush or recessed (up to 1.75 in.) Integral turntable with push-button release Four bottom rail slides (for loads to 250 lbs.) 11-gauge steel corner post mounting rails tapped 10-32 Front security panel attaches with screws Six cable lacing bars Black powder epoxy finish Ships unassembled (two cartons) COMPLIANCE & CERTIFICATION EIA/TIA compliant RoHS compliant Certified U.S. steel Made in Missouri, U.S.A. A&E SPECIFICATIONS The rack for built-in applications shall be Lowell Model No. LPTR4-2419 which shall be certified U.S. steel with a smooth black powder epoxy finish. Overall measurements shall be 44.58"H x 19.13"W x 19.22"D with 24U panel space. The base shall feature four bottom rails and integral turntable to allow the rack to slide forward, rotate and lock at 60 or 90 degrees. The rack shall include six cable lacing bars, a front security panel and side supports with obround openings. Load capacity shall be 250 lbs. The rack shall ship unassembled in two cartons.

24U pull-out rack for superior access to equipment in cabinets or millwork, the top section of the rack slides forward and turns (left or right), locking at several positions. For loads up to 250 lbs.

SPECIFICATIONS

Rack Space: 24U
Height: 44.58 in.
Width: 19.13 in.
Depth: 19.22 in. (19 usable)

FEATURES

Removable base mounts flush or recessed (up to 1.75 in.)
Integral turntable with push-button release
Four bottom rail slides (for loads to 250 lbs.)
11-gauge steel corner post mounting rails tapped 10-32
Front security panel attaches with screws
Six cable lacing bars
Black powder epoxy finish
Ships unassembled (two cartons)

COMPLIANCE & CERTIFICATION

EIA/TIA compliant
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.

A&E SPECIFICATIONS

The rack for built-in applications shall be Lowell Model No. LPTR4-2419 which shall be certified U.S. steel with a smooth black powder epoxy finish. Overall measurements shall be 44.58"H x 19.13"W x 19.22"D with 24U panel space. The base shall feature four bottom rails and integral turntable to allow the rack to slide forward, rotate and lock at 60 or 90 degrees. The rack shall include six cable lacing bars, a front security panel and side supports with obround openings. Load capacity shall be 250 lbs. The rack shall ship unassembled in two cartons.