Lowell LPOR4-2119

Product Description


LPOR4-2119: Pull-Out Rack 21U x 19?D


Pull out rack (slide out rack) for use in cabinets or custom millwork, the top section of the rack slides forward to access mounted electronics.

SPECIFICATIONS Rack Space: 21U Height: 38.62 in. Width: 19.06 in. Depth: 19.22 in. FEATURES 11-gauge steel corner post mounting rails tapped 10-32 (21U front, 7U rear) 14-gauge steel base Four bottom rail slides (for loads to 250 lbs.) Three cable lacing bars Front security panel screws into position Black powder epoxy finish Ships unassembled (two cartons) COMPLIANCE & CERTIFICATION EIA/TIA compliant RoHS compliant Certified U.S. steel Made in Missouri, U.S.A. A&E SPECIFICATIONS The rack for built-in use shall be Lowell Model No. LPOR4-2119 which shall measure 19.06”W x 19.22”D x 38.62”H and provide 21 rack units of panel space (21U front rails, 7U rear rails). The rack shall be made with certified U.S. steel and feature a 14-gauge steel base and 11-gauge steel mounting rails tapped 10-32. The base shall feature four heavy duty rails which shall allow the rack to slide forward while supporting a load up to 250 lbs. The rack shall include three cable lacing bars in the rear and a front security panel which shall mount with screws to deter slide-out access to equipment as needed for security. The rack shall have a black powder epoxy finish and ship unassembled in two cartons.

Pull out rack (slide out rack) for use in cabinets or custom millwork, the top section of the rack slides forward to access mounted electronics.

The rack for built-in use shall be Lowell Model No. LPOR4-2119 which shall measure 19.06”W x 19.22”D x 38.62”H and provide 21 rack units of panel space (21U front rails, 7U rear rails). The rack shall be made with certified U.S. steel and feature a 14-gauge steel base and 11-gauge steel mounting rails tapped 10-32. The base shall feature four heavy duty rails which shall allow the rack to slide forward while supporting a load up to 250 lbs. The rack shall include three cable lacing bars in the rear and a front security panel which shall mount with screws to deter slide-out access to equipment as needed for security. The rack shall have a black powder epoxy finish and ship unassembled in two cartons.