Home • Departments • Install - Contractor - Architectural • Lowell • Lowell LDR-2724

Lowell LDR-2724

Product Description


LDR-2724: Designer Rack 27U x 24?D


19 inch equipment rack -- an elegant design for the high-end decor of boardrooms and home theaters, this ready-to-use rack includes leg levelers, lockable side panels, a rear access cover, and a tempered glass front door. Charcoal Grey textured finish.

SPECIFICATIONS Rack Space: 27U Height: 51.42 in. Width: 22.31 in. Depth: 24.00 in. FEATURES Solid top with vents and cable entry port Base with open center and cable entry ports Removable side access covers with key locks (opens from top) Rear access cover with key lock (opens from top) Smoked grey tempered glass front door with key lock Two-pair fully adjustable rails tapped 10-32 with printed RU scale Grounding stud Leg levelers Beveled corners Charcoal Grey textured powder epoxy finish Pilot Point screws with captive washers Load capacity 750 lbs. COMPLIANCE & CERTIFICATION EIA/TIA compliant RoHS compliant Certified U.S. steel Made in Missouri, U.S.A. A&E SPECIFICATIONS The EIA/TIA compliant 19" equipment rack shall be Lowell Model No. LDR-2724 which shall measure 22.31"W x 24.00"D x 51.42"H. The rack shall have 27U panel space and 750 lbs. load capacity. Construction shall be fully welded 16-gauge steel with 16-gauge top/base reinforced at load-bearing junctions and finished with a charcoal grey textured coating. It shall include a smoked grey tempered glass front door with key lock, recessed rear access cover with key lock, removable side panels with locks, two pairs of 11-gauge steel rails with mounting holes tapped 10-32 and rack unit increments printed on EIA spacing, steel top with 2 vents and a hole with grommet for cable access. The base shall feature a center opening, 2 holes with grommets for rear cable access, grounding stud and 4 leg levelers.

19 inch equipment rack -- an elegant design for the high-end decor of boardrooms and home theaters, this ready-to-use rack includes leg levelers, lockable side panels, a rear access cover, and a tempered glass front door. Charcoal Grey textured finish.

SPECIFICATIONS

Rack Space: 27U
Height: 51.42 in.
Width: 22.31 in.
Depth: 24.00 in.

FEATURES

Solid top with vents and cable entry port
Base with open center and cable entry ports
Removable side access covers with key locks (opens from top)
Rear access cover with key lock (opens from top)
Smoked grey tempered glass front door with key lock
Two-pair fully adjustable rails tapped 10-32 with printed RU scale
Grounding stud
Leg levelers
Beveled corners
Charcoal Grey textured powder epoxy finish
Pilot Point screws with captive washers
Load capacity 750 lbs.

COMPLIANCE & CERTIFICATION

EIA/TIA compliant
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.

A&E SPECIFICATIONS

The EIA/TIA compliant 19" equipment rack shall be Lowell Model No. LDR-2724 which shall measure 22.31"W x 24.00"D x 51.42"H. The rack shall have 27U panel space and 750 lbs. load capacity. Construction shall be fully welded 16-gauge steel with 16-gauge top/base reinforced at load-bearing junctions and finished with a charcoal grey textured coating. It shall include a smoked grey tempered glass front door with key lock, recessed rear access cover with key lock, removable side panels with locks, two pairs of 11-gauge steel rails with mounting holes tapped 10-32 and rack unit increments printed on EIA spacing, steel top with 2 vents and a hole with grommet for cable access. The base shall feature a center opening, 2 holes with grommets for rear cable access, grounding stud and 4 leg levelers.