LCDR-1824: Configured Design Rack

An elegant design made for the high-end decor of boardrooms and home theaters, this ready-to-use rack includes casters, leg levelers, three shelves, three blank panels, two fans, lockable side panels, a rear access cover, and a tempered glass front door. Charcoal Grey textured finish.

SPECIFICATIONS

• Rack Space:  18U

• Overall Height:  35.67 in. (38.43 in. with casters)

• Overall Width:  22.31 in.

• Overall Depth:  24.00 in.

FEATURES

• Solid top with vents and cable entry port

• Base with open center and cable entry ports

• Removable side access covers with key locks (opens from top)

• Rear access cover with key lock (opens from top)

• Smoked grey tempered glass front door with key lock

• Two-pair fully adjustable rails tapped 10-32 (printed RU scale)

• Pilot Point screws with captive washers

• Grounding stud

• Beveled corners

• Charcoal Grey textured powder epoxy finish

• Load capacity 500 lbs.

INSTALLED ACCESSORIES

• Swivel casters

• Leg levelers

• Vented shelves (3)

• Blank panels (3)

• Whisper fans in top vents (2)

COMPLIANCE & CERTIFICATION

• EIA/TIA compliant

• RoHS compliant

• Certified U.S. steel

• Made in Missouri, U.S.A.

A&E SPECIFICATIONS

The EIA/TIA compliant 19" equipment rack shall be Lowell Model No. LCDR-1824 which shall measure 22.31"W x 24.00"D x 38.43"H (with casters). The rack shall have 18U panel space and 500 lbs. load capacity. Construction shall be fully welded 16-gauge steel with 16-gauge top/base reinforced at load-bearing junctions and finished with a charcoal grey textured coating. It shall include a smoked grey tempered glass front door with key lock, recessed rear access cover with key lock, removable side panels with locks, two pairs of 11-gauge steel rails with mounting holes tapped 10-32 and rack unit increments printed on EIA spacing, steel top with 2 vents and a hole with grommet for cable access, three (2U x 18"D) shelves with vents, and three (2U) blank panels. The base shall feature a center opening, 2 holes with grommets for rear cable access, a grounding stud, 4 casters (2 locking) and 4 leg levelers.