|Martin JEM Ready 365 Hazer 120V 50/60Hz|
The JEM Ready 365 is a revolutionary C02 based hazer that produces outstanding fine-particulate atmospheric effects for larger venues. Using an advanced water-based fluid that gives a comparable performance to oil, this premium hazer produces the ultimate transparent haze.
The JEM Ready 365 Hazer houses advanced technology like automatic shutdown with battery backup to prevent clogging and OFG (Out of Gas) technology that allows the Ready 365 to produce haze even after gas pressure loss, giving the user time to change the gas cylinder.The Ready 365 is extremely economical and sips small amounts of fluid leaving no residue or smell after dissipation.
The easy-to-use plug and play system requires minimal set up time. Coupled with a list of innovative features and nearly silent in operation, the JEM Ready 365 is the ideal hazer for theatres, house of worship, spoken word, studios, clubs, cruise ships, theme parks and much more.
- Exceptional Effect Quality - similar to oil based effects.
- Near Silent Operation, limited fan and pump noise.
- Actors' Equity/Broadway League Approved.
- Water based fluid provides long hang time and evenly dispersed effect.
- 3.8 l concealed fluid reservoir can yield over 200+ hours of operation.
- Sealed fluid system with quick-connect fittings.
- Inert gas operation from either CO2 or N2.
- Low inert gas consumption. Economical .42kg (.91lb.) per hour at maximum output.
- Gas transfer hose fitted with quick-connect fittings for fast and easy setup.
- Integrated airflow director for smooth haze distribution.
- Plug-and-play with programmable fast-access keys, stored memory.
- DMX control with RDM as standard.
- Optional precision fixed regulator for maximum durability.
- Robust road worthy construction.
Length: 760 mm (30.0 in.) Width: 320 mm (12.6 in.) Height: 280 mm (11.1 in.) Dry weight: 16 kg (35.3 lbs.) Filled weight: 19.8 kg (43.7 lbs.)
Coverage volume: 5500 m3 (194,231 ft3) per minute Operating time with 3.8 l fluid (min/max): 35/200 hours Typical gas consumption at peak output: 250 g (0.5 lb.) per hour Continuous effect output Ready time: 7.5 minutes Ambient noise: Silent mode
Control and Programming
Control options: Digital control panel, programmable fast access keys, DMX, optional digital remote control, master/slave link mode Control parameters: Continuous or timer-controlled output Haze and fan: Independent variable output, 0-100% DMX channels: 3 (Haze, Fan, Control) Self-cleaning cycle: Battery-powered automatic shutdown, manually engaged, or DMX DMX compliance: ANSI E1.11 - USITT DMX512-A RDM compliance: ANSI E1.20
Housing: Steel and aluminum Color: Black Heat exchanger: 600 W trackless heat exchanger, thermally protected Blower fan: Integrated, 200-2500 RPM Airflow control: Integrated airflow director Fluid pump: Oscillating piston, high pressure Fluid management: Fluid out sensing, sealed for transportation Fluid reservoir: 3.8 l removable concealed reservoir with quick-connect fitting Gas transfer system: Transfer hose included with push-pull valved quick-connector Gas management: Onboard proportional valve and digital mix/pressure sensor Gas monitoring: Low-pressure warning, OFG (Out of Gas) system Optional fixed regulator*: Fixed output (30 psi), brass housing, 9 mm and 3/8” BSP *Region-specific, see matrix for ordering information.
Mounting: Floor Orientation: Horizontal only Clearance around machine: 100 mm (4.0 in.) Gas type: Inert gas, industrial grade CO2 or N2 required Gas storage*: Customer supplied compressed gas cylinder Gas storage type: Low-pressure, vapor/gas takeoff only Gas pressure regulation: Regulator required, 30 psi *Region specific.
AC power in/out: Neutrik PowerCon DMX, link mode in/out: 3-pin and 5-pin locking XLR Remote control: 3-pin locking XLR Firmware upgrade: AVR socket Gas input coupling: Push-pull valved quick-connect coupling, 6 mm (0.3 in.)
EU Model AC power: 220-240 V, 50/60 Hz Main fuse: 6.3 AT Typical power and current: 675 W, 2.9 A* US Model AC power: 100-130 V, 50/60 Hz Main fuse: 10 AT Typical power and current: 675 W, 5.8 A* *Measurements made at nominal voltage. Allow for a deviation of +/- 10%
Maximum ambient temperature (Ta max.): 40° C (104° F) Exterior surface temperature, steady state: 30° C (86° F) Maximum nozzle temperature: 290° C (554° F)
EU EMC: EN 61000-6-3, EN 61000-6-1 EU safety: EN 60335-1+A15, EN 62233 US safety (pending): UL 998 Canadian safety (pending): CSA C22.2 No 104-01 Calibration factors have been developed and approved by the Actors’ Equity Association and the Broadway League for use in measuring theatrical haze with the JEM Ready 365™ and JEM R365 Haze Fluid™
Fluid container 3.8 l: P/N 34300537 Gas transfer hose with connectors, 9mm and 3/8” BSP, 2 m (6.6 ft.): P/N 26460486 Power input cable, EU, powerCON, stripped ends, 2.5 m (8.2 ft.): P/N 11501041 Power input cable, US, powerCON, molded NEMA 5-15P, 2.5 m (8.2 ft.): P/N 11501042
JEM™ Ready 365, Digital Remote Control: P/N 92765041 Compatible gas pressure regulators Fixed Regulator, UK*: P/N 92620014 Fixed Regulator, USA, Canada, Brazil: P/N 92620015 Fixed Regulator, Germany: P/N 92620016 Fixed Regulator, France, Belgium, North Africa, Greece: P/N 92620017 Fixed Regulator, Netherlands: P/N 92620019 Fixed Regulator, Japan: P/N 92620020 Fixed Regulator, Russia: P/N 92620021 Fixed Regulator, Custom: P/N 92620018 Fixed Regulator, Nitrogen: P/N 92620022 *Covers United Kingdom, Algeria, Australia, Austria, Denmark, Eire, Finland, Hong Kong, Iceland, Italy, Malta, Norway, Poland, Singapore, Spain, Sweden, Switzerland, and UAE. Please contact Martin Professional for regions not listed. Service tools Epsilon 5 AVR Programmer: P/N 50502004 Temperature Calibration Box: P/N 92620005 Approved fluids JEM™ R365 Haze Fluid: Available in 5, 9.5, and 25 liter containers* JEM™ Pro Clean Supreme: Available in 2.5 liter containers* *Contact your dealer or see 'Fluids' product pages for details
Jem Ready 365™, US: P/N 92225975 Jem Ready 365™, EU: P/N 92225970