|Martin RUSH MH 5 Profile|
This compact and bright LED profile moving head with efficient optics punches out a variety of effects and colors. With two color wheels, two gobo wheels and rotating prism the MH 5 Profile offers full effect in a super compact housing, making it perfect for DJs, bands, clubs, bars, cruise ships and installations where small footprint and low weight is critical.
- Compact 75 W LED moving head profile
- One rotating and one fixed gobo wheel
- Two color wheels
- Compact 75 W LED profile moving head
- Super bright - efficient optics
- Rotating gobo wheel
- Fixed gobo wheel
- 2 x color wheels
- Electronic dimming and strobe
- 3-facet prism
Length: 290 mm (11.5 in.) Width: 187 mm (7.4 in.) Height: 416 mm (16.4 in.) Weight: 9 kg (19.9 lbs.)
Color wheel 1: 8 colors plus open, rotation with variable direction and speed Color wheel 2: 8 colors (incl. 1 x UV, 2 x CTC) plus open, rotation with variable direction and speed Rotating gobo wheel: 6 gobos plus open, wheel rotation and gobo rotation Static gobo wheel: 7 gobos plus open, wheel rotation and shake Electronic 'shutter' effect: Strobe effect, pulse effects, instant open and blackout Prism: Indexing and rotation with variable direction and speed Focus: Motorized Electronic dimming: 0 - 100%, four dimming curve options Pan: 540° Tilt: 270° Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming
Control options: DMX, stand-alone DMX channels: 16 Stand-alone trigger options: Music trig, auto trig Stand-alone sequences: 4 pre-programmed shows Music trig sensitivity: Adjustable Setting and addressing: Control panel with backlit LCD display Protocol: USITT DMX512/1990
Light source: 75 W LED engine Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer's test conditions
Color: Black Housing: High-impact flame-retardant thermoplastic Protection rating: IP20
Mounting: One quarter-turn bracket for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any
AC power in/thru: Neutrik PowerCon DMX data in/out: 3-pin and 5-pin locking XLR
AC power: 100-240 V nominal, 50/60 Hz Typical total power consumption: 165 W Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current
100 V, 60 Hz: 1.7 A, 165 W 230 V, 50 Hz: 0.8 A, 157 W Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 565 BTU/hr.
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241
CE ETL C US Intertek
Power cable, 1.5 m, without mains plug
Cables, 16 A, for connection to power in chains Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9 ft. 11 in.): P/N 11541508 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 1.4 m (4 ft. 8 in.): P/N 11541509 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 2.25 m (7 ft. 5 in.): P/N 11541510 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3.25 m (10 ft. 8 in.): P/N 11541511 Connectors Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804 Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805 DMX link DMX termination plug, 3-pin male XLR: P/N 91613017 Installation hardware G-clamp: P/N 91602003 Half-coupler clamp: P/N 91602005
RUSH™ Software Uploader 1: P/N 91611399
RUSH MH 5 Profile™ in cardboard box, EU: P/N 90280040 RUSH MH 5 Profile™ in cardboard box, US: P/N 90280045