Physical
Length: 452 mm (17.8 in.) Width (across yoke): 431 mm (17 in.) Height (maximum): 581 mm (22.9 in.) Height (head straight up): 511 mm (20.1 in.) Weight: 21 kg (46.3 lbs.)
Dynamic Effects
Color mixing: RGBW Beam effects: Beam twister, light and color morphing, color spin 'Color wheel' effect: 36 solid colors plus white, variable-speed 'color wheel rotation' effect and random color Color ring effects: 36 split ring colors with variable-speed color wheel rotation effects Shutter effect: Electronic, with variable speed regular and random strobe Pre-programmed effects: Range of synchronized and independent color, intensity, beam twister and zone effects Electronic dimming: Four dimming curve options Color temperature control: Variable 2000 - 10 000 K Zoom: Motorized Pan: 540° Tilt: 270° Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming
Control system: DMX Control options: Independent control of color ring/beam zones Macro programs selectable via DMX: Range of synchronized and independent color, intensity, beam twister and zone effects RDM: Implemented Control resolution: 8-bit, with 16-bit control of pan, tilt, dimming and lens rotation DMX channels: 33/17 Setting and addressing: Control panel with backlit graphic display DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: RS-485 Fixture software update: USB memory device or USB/DMX hardware interface over DMX link
Optics
Light source: 50 x 15 W RGBW LEDs LED refresh rate: Beam 3000 Hz, Aura 3000 Hz Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Zoom range: 11–53° (1:5) Output: 16 000 lm *Figure obtained under manufacturer´s test conditions
Construction
Color: Black Housing: High-impact flame-retardant thermoplastic Protection rating: IP20
Installation
Mounting points: 2 pairs of 1/4-turn locks Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m Minimum distance to illuminated surfaces: 2.0 m
Connections
AC power input: Neutrik PowerCon DMX and RDM data in/out: 5-pin locking XLR
Electrical
AC power: 120-240 V nominal, 50/60 Hz Maximum total power consumption: 1020 W Power supply unit: Auto-ranging electronic switch mode Typical half-cycle RMS inrush current: 10.3 A Typical power consumption, all effects static, zero light output: Approx. 50 W
Typical Power and Current
120 V, 60 Hz: 7.4 A, 880 W, PF 0.999 208 V, 60 Hz: 4.2 A, 860 W, PF 0.995 230 V, 50 Hz: 3.8 A, 856 W, PF 0.993 240 V, 50 Hz: 3.7 A, 858 W, PF 0.992 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 15%.
Thermal
Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C Minimum ambient temperature (Ta min.): 5° C Max. total heat dissipation (calculated, +/- 15%): 3480 BTU/hr.
Approvals
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA C22.2 No. E598-2-17 (CSA E60598-1) Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241
CE ETL C US Intertek
Included Items
Two omega brackets for rigging clamp attachment: P/N 91602001
Accessories
3 m power cable, 12 AWG, SJT, with PowerCon NAC3FCA power input connector: P/N 11541503 Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804 Soft Lens for MAC Quantum Wash™: P/N 91611600 Half-coupler clamp: P/N 91602005 G-clamp: P/N 91602003 Quick trigger clamp: P/N 91602007 Flightcase for 2 x MAC Quantum™: P/N 91510210
Related Items
Martin USB Duo™ DMX Interface Box: P/N 90703010 Martin RDM 5.5 Splitter™: P/N 90758150
Ordering Information
MAC Quantum Wash™ in cardboard box: P/N 90240020 MAC Quantum Wash™ in 2-unit flightcase: P/N 90240030
|